MIL-B-49030A
4.6.1.5.5 Marking. Sample batteries allocated to tests specified in 4.6.1.5 shall be marked "(*)TEST SAMPLE."
The asterisk (*) shall be replaced by "T" or "D", as applicable.) The marking shall be rubber stamped or placed on a
label securely attached to each battery. However, on batteries weighing eight ounces and less, the above marking
shall be placed on the outside of each unit package.
4.7 Methods of examination and tests.
4.7.1 Visual and mechanical examination. Batteries shall be examined to determine compliance with all applicable
requirements and characteristics listed in table lX. When internal examination is necessary it shall be performed
either during fabrication of the battery, or by dismantling the finished battery.
4.7.1.1 Potting. The manufacturer shall determine the minimum weight of an adequately potted battery, and shall
not present for acceptance any batteries failing to meet this minimum weight requirement. This shall be done by
determining the minimum weight of a battery filled with a sufficient quantity of potting material to withstand the
vibration and mechanical-shock tests specified (see 3.1).
TABLE IX. Visual and mechanical examination.
Requirement
Reference
paragraph
External
Design and construction 1/
Terminals
Jackets
Closure
Strap handle (when applicable)
Internal
Dissimilar metals
Filler or padding
Cell-block container
Intercell separation
Intercell connections
Age of cells
Metallic jackets
Insulating, impregnating, potting,
and sealing compounds
1/ With exception of dimensions and weight, shall be
24
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business