MIL-B-18/6E
Inches
mm
Ltr
Min
Max
Min
Max
A
.938
1.188
23.80
30.18
B
3.938
4.188
100.03
106.38
C
6.938
7.188
176.23
182.58
D
8.000
8.250
203.20
209.55
E
4.250
4.500
107.95
114.30
F
.875
1.125
22.23
28.58
G
---
7.938
---
201.63
H
7.125
7.375
180.98
187.33
NOTES:
1. All dimensions shown on figure 1 are in inches.
2. Metric equivalents specified in the table are for general information only.
3. Voltage and polarity markings may be placed either on the top or front face of the battery
4. Unless otherwise specified, tolerance is ±.125 inch.
FIGURE 1. Interface and physical dimensions - Continued.
REQUIREMENTS:
Interface and physical dimensions: See figure 1.
Nominal voltage: 45 volts.
Tapped at: 22.5 volts.
Usual number and type of cells: 30 "F" cells.
Usual cell connection: Series.
Terminals: Spring clip.
Weight (maximum): 13 pounds, 12 ounces.
Capacity tests: When the battery is tested in accordance with the methods of examination and test of this
specification, the minimum capacity-test requirements shall be not less than the minimum time specified for SLD or
SLT.
First article inspection:
Visual and mechanical (external).
Battery voltage.
2
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business